High barrier, Multi-Bar is thermo shrinkable casing produced from specially formulated polyamide raw material of high polymer quality.
Polyamide Multi-Bar is high quality casing that extends shelf life and reduces costs for costly secondary packaging, due to its advanced barrier properties that keep oxygen out and moisture in.
Plastic barrier, shrinkable multilayer casings come in every color on the Pantone chart.
Polyamide MB is an excellent carrier for printing, and we are proud that our print and art is the highest quality that you can find on the market.
Printing in flexo technique up to 10 colors, with printing inks that are resistible to sterilization and abrasion.
Make your product stand out, take your business to that next level.
Polyamide MB casing shirred or cut pieces should be soaked in COLD WATER for
approximately 30 minutes.
Polyamide MB casing should be stuffed tightly; 5% to 8% larger than nominal diameter. Never under stuff casing. Clip tightly. Clip should not slip.
Steam or water cook to desired internal temperature.
Cool slowly. If possible, utilize an intermittent 2 minute on and 3 minute off
showering cycle until internal temperature reaches 115-118 degrees. Otherwise shower continuously for 20 minutes.
We recommend you do not place product in direct airflow from fans immediately after cooking. Cooling too quickly or refrigeration casing before it is cooled down may cause wrinkles. Finished products may be frozen.
Polyamide Multi-Bar is usually produced in standard diameters inbetween 40mm to 145mm...
Custom diameters also available.